Terkko Navigator / Composites. Part A, Applied science and manufacturing

Dynamic behavior of impact hardening elastomer: A flexible projectile material with unique rate-dependent performance

Electrospun porous carbon nanofibers @ SnOx nanocomposites for high-performance supercapacitors: Microstructures and electrochemical properties

Eddy current testing for estimation of anisotropic electrical conductivity of multidirectional carbon fiber reinforced plastic laminates

A novel method to fabricate two-dimensional nanomaterial based on electrospinning

Ultra-tough and in-situ repairable carbon/epoxy composite with EMAA

Experimental investigation, using 3D digital image correlation, into the effect of component geometry on the wrinkling behaviour and the wrinkling mechanisms of a biaxial NCF during preforming

Ultrahigh discharge efficiency and improved energy density in polymer-based nanocomposite for high-temperature capacitors application

Prediction of enhanced interfacial bonding strength for basalt fiber/epoxy composites by micromechanical and thermomechanical analyses

Effect of Z-pin inclined angle on the impact damage suppression effectiveness for cross-ply composite laminates

Effects of graphene on various properties and applications of silicone rubber and silicone resin

Enhancement of fiber–matrix adhesion in carbon fiber reinforced Al-matrix composites with an optimized electroless plating process

Improving the performance of pseudo-ductile hybrid composites by film-interleaving

Compressive strength degradation of the curved sections of 3D-printed continuous carbon fiber composite

Experimental characterisation of textile compaction response: A benchmark exercise

Experimental investigation of the influence of dynamic multiaxial transverse loading on ultrahigh molecular weight polyethylene single fiber failure

Fundamentals, materials and strategies for personal thermal management by next-generation textiles

Efficient fabrication of highly exfoliated and evenly dispersed high-density polyethylene/expanded graphite nanocomposite with enhanced dielectric constant and extremely low dielectric loss

The influence of temperature and moisture on the mode I fracture toughness and associated fracture morphology of a highly toughened aerospace CFRP

Experimental study and in-situ FBG monitoring of process-induced strains during autoclave co-curing, co-bonding and secondary bonding of composite laminates

Synthesis of MOF-derived Fe7S8/C rod-like composites by controlled proportion of carbon for highly efficient electromagnetic wave absorption

Characterization of the interlaminar shear strength of IM7/8552 using small-scale short beam shear tests

Composite temperature profile and tooling optimization via Deep Reinforcement Learning

Effective regulation of thermal conductivity of polyetherimide/low–melting–point alloy composites based on the construction of segregated structure

Carbon coated piezoresistive fiber sensors: From process monitoring to structural health monitoring of composites – A review

Hierarchically carbonized silk/ceramic composites for electro-thermal conversion

Study on the incremental sheet forming of CFRP sheet

Controllable configuration of conductive pathway by tailoring the fiber alignment for ultrasensitive strain monitoring

Analysis of the wrinkle geometry of the woven fabrics during uniaxial bias extension test using Ricker wavelet algorithm

Carbonized cellulose microsphere@void@MXene composite films with egg-box structure for electromagnetic interference shielding

Highly thermal conductivity and flame retardant flexible graphene/MXene paper based on an optimized interface and nacre laminated structure

Multilayered structural design of flexible films for smart thermal management

Interface mechanics in carbon nanomaterials-based nanocomposites

A strategy that combines a hydrogel and graphene oxide to improve the water-lubricated performance of ultrahigh molecular weight polyethylene

Covalent sizing surface modification as a route to improved interfacial adhesion in carbon fibre-epoxy composites

Mechanically flexible, super-hydrophobic and flame-retardant hybrid nano-silica/graphene oxide wide ribbon decorated sponges for efficient oil/water separation and fire warning response

Optimisation of an in-process lineal dielectric sensor for liquid moulding of carbon fibre composites

Temperature and strain-induced tunable electromagnetic interference shielding in polydimethylsiloxane/multi-walled carbon nanotube composites with temperature-sensitive microspheres

Lab-based in-situ micro-CT observation of gaps in prepreg laminates during consolidation and cure

Chemical modification of natural fibres to epoxy laminate for lightweight constructions

Graphene nanosheet/Cu nanowire composite aerogel with a thin PDMS coating for electrically conductive pressure sensing rubber

Load-dependent path planning method for 3D printing of continuous fiber reinforced plastics

Prediction of the compressive damage response of flax-reinforced laminates using a mesoscale framework

Impregnating epoxy into N-doped-CNTs@carbon aerogel to prepare high-performance microwave-absorbing composites with extra-low filler content

Size effects in hybrid unidirectional polymer composites under longitudinal tension: A micromechanical investigation

A review of bast fibres and their composites: Part 4 ~ organisms and enzyme processes

A universal surface modification method of carbon nanotube fibers with enhanced tensile strength

Strong, conductive aramid fiber functionalized by graphene

Architectured graphene and its composites: Manufacturing and structural applications

Properties of economical and eco-friendly polybutylene adipate terephthalate composites loaded with surface treated coffee husk

Utilization of coffee silverskin in the production of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) biopolymer-based thermoplastic biocomposites for food contact applications