Terkko Navigator / Biodegradation

Single-well push–pull tests evaluating isobutane as a primary substrate for promoting in situ cometabolic biotransformation reactions

Vinasse odyssey: sugarcane vinasse remediation and laccase production by Trametes sp. immobilized in polyurethane foam

The intrinsic relevance of nitrogen removal pathway to varying nitrate loading rate in a polycaprolactone-supported denitrification system

Degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) by fungi originating from Vietnam

Tylosin in anaerobic reactors: degradation kinetics, effects on methane production and on the microbial community

Investigating the biological degradation of the drugβ-blocker atenolol from wastewater using the SBR

Enhanced anaerobic treatment of synthetic protein-rich wastewater promoted by organic xerogels

Up-flow anaerobic column reactor for sulfate-rich cadmium-bearing wastewater purification: system performance, removal mechanism and microbial community structure

Immobilization of psychrophile Psychrobacter sp. ANT206 onto novel reusable magnetic nanoparticles and its application for nitro-aromatic compounds biodegradation under low temperature

Kinetic isotope effects of C and N indicate different transformation mechanisms between atzA- and trzN-harboring strains in dechlorination of atrazine

Hydrocarbon-degrading bacteria in Colombia: systematic review

Co-metabolism of nonylphenol ethoxylate in sequencing batch reactor under aerobic conditions

Biological recovery of phosphorus from waste activated sludge via alkaline fermentation and struvite biomineralization by Brevibacterium antiquum

Evaluation of in situ biosurfactant production by inoculum of P. putida and nutrient addition for the removal of polycyclic aromatic hydrocarbons from aged oil-polluted soil

Alterations of endophytic microbial community function in Spartina alterniflora as a result of crude oil exposure

A critical review on microbial degradation of petroleum-based plastics: quantitatively effects of chemical addition in cultivation media on biodegradation efficiency

LcaR: a regulatory switch from Pseudomonas aeruginosa for bioengineering alkane degrading bacteria

Production and analysis of capsules containing microorganisms consortiated for future application in petroleum bioremediation

Efficiency of sulfamethoxazole removal from wastewater using aerobic granular sludge: influence of environmental factors

An evaluation into the biosorption and biodegradation of azo dyes by indigenous siderophores-producing bacteria immobilized in chitosan

Using a sulfur autotrophic fluidized bed reactor for simultaneous perchlorate and nitrate removal from water: S disproportionation prediction and system optimization

Microbial reduction of Cr(VI) in the presence of Ni, Cu and Zn by bacterial consortium enriched from an electroplating contaminated site

Aerobic degradation of 2,4,6-trinitrophenol by Proteus sp. strain OSES2 obtained from an explosive contaminated tropical soil

Preparation and performance evaluation of novel magnetic porous carriers in fluidized bed bioreactor for wastewater treatment

Biodegradation of 4-hydroxybenzoic acid by Acinetobacter johnsonii FZ-5 and Klebsiella oxytoca FZ-8 under anaerobic conditions

RETRACTED ARTICLE: Role of UV photolysis in accelerating the biodegradation of 2,4,6-TCP

Assessment of polyethylene degradation by biosurfactant producing ligninolytic bacterium

Does electrifying organic synthesis pay off? The energy efficiency of electro-organic conversions

Role of titanium carbide and alumina on the friction increment for Cu-based metallic brake pads under different initial braking speeds

Penetration and lubrication evaluation of vegetable oil with nanographite particles for broaching process

Fundamental study on chaotic transition of two-phase flow regime and free surface instability in gas deaeration process

Correction to: Thermal hydraulic considerations of nuclear reactor systems: Past, present and future challenges

An efficient three-dimensional foil structure model for bump-type gas foil bearings considering friction

A novel point source oxygen supply method for sleeping environment improvement at high altitudes

Thermal comfort in winter incorporating solar radiation effects at high altitudes and performance of improved passive solar design—Case of Lhasa

The effects of portable cooling systems on thermal comfort and work performance in a hot environment

Does laser surface texturing really have a negative impact on the fatigue lifetime of mechanical components?

Black phosphorus quantum dots: A new-type of water-based high-efficiency lubricant additive

Individual thermal comfort prediction using classification tree model based on physiological parameters and thermal history in winter

Correction to: From indoor exposure to inhaled particle deposition: A multiphase journey of inhaled particles

An exploration of frictional and vibrational behaviors of textured deep groove ball bearing in the vicinity of requisite minimum load

Improvement of the lubrication properties of grease with Mn3O4/graphene (Mn3O4#G) nanocomposite additive

A low-to-high friction transition in gradient nano-grained Cu and Cu-Ag alloys

Exploring the role of−NH2 functional groups of ethylenediamine in chemical mechanical polishing of GCr15 bearing steel

Dynamic model and response characteristics of liquid desiccant air-conditioning system driven by heat pump

Analysis of microclimate characteristics in solar greenhouses under natural ventilation

Erratum to: Study on dynamic variation of dew point temperature at attached air layer of radiant ceiling cooling panels

Temperature-induced difference in microbial characterizations accounts for the fluctuation of sequencing batch biofilm reactor performance

Functional interplay between plastic polymers and microbes: a comprehensive review

Efficiencies of selected biotreatments for the remediation of PAH in diluted bitumen contaminated soil microcosms